Utilize a Pneumatic Forklift
Pneumatic forklifts are common in warehouse and shipping operations. Also referred to as pump trucks or pallet trucks, they are used in order to transport things and materials around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight includes a pump which could raise the forks off the ground. A pallet truck is intended to be operated by one person.
Pallet trucks must be operated with care in order to prevent loss of control while raising heavy loads. Equipment should be inspected prior to operating. Clear the wheels area of any obstructions. Check that the handle could turn smoothly. The pallet must be carefully stacked to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to release the air in the pump and lower the forks. The forks can then be pushed into the slots of the pallet. The forks must be in the middle to ensure equal distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not lift the pallet very high or the forklift can unbalance.
Pull on the handle and drag it behind you if you want to move the pallet. It is dangerous to push the pallet in front of you because the thrust could cause it to lose control. Slowly take turns and don't try to stop suddenly. Slowly come to a stop, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.