Change a Propane Tank
Forklifts powered by propane are common inside warehouse environments. These forklifts have a propane mount situated at the back of the driver. These tanks need to be replaced every so often as they have limited lifespans. Operators of forklifts must use caution when handling propane tanks. Compressed gases are dangerous, especially because the gas is flammable. Use care when replacing and removing propane tank to avoid injury.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn off the tank valve. The lift truck should be left on until the engine dies. This procedure burns off the gas in the transfer hose which connects the tank and the engine. Prior to taking the second steps, put on the proper safety equipment, like for instance insulated gloves made of either leather or neoprene. It is really essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reattach the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 You can inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to froth around the value. If this happens, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the valve area, and after that do the leak checking process again. Persistent leaks mean that the nut and connecting hose should be replaced. Then again, if replacing the nut and hose still does not stop the leak, the tank must be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the lift truck and continue working.